濟南通風管的使用維護的知識
發布人:http://rdhw.com.cn 發布時間:2017-07-13 17:02:00
通風管按涂覆布材料分為橡膠涂覆布正壓通風管、塑料涂覆布正壓通風管和橡塑涂覆布正壓通風管;又可按形狀結構分為螺旋通風管,伸縮通風管。
The ventilation pipe is divided into rubber coating cloth, positive pressure ventilation pipe, plastic coating cloth, positive pressure ventilation pipe and rubber plastic coating positive pressure ventilation pipe according to the coating cloth material, and can be divided into spiral ventilation pipe and telescopic ventilation pipe according to the shape structure.
生產執行標準:標準號: GB/T 9900-2008 《橡膠或塑料涂覆織物 通風管》規定了橡膠或塑料涂覆織物通風管的分類、結構、技術要求、試驗方法、檢驗規則、包裝、標志、運輸和貯存等。
Executive standard: Standard No.: GB/T 9900-2008 "rubber or plastics coated fabrics" provisions of the ventilation pipe classification, rubber or plastics coated fabrics of ventilation pipe structure, technical requirements, test method, inspection rules, packaging, marking, storage and transportation etc..
耐風壓性:通風管經耐風壓試驗后不得產生通風管脫節、涂覆布撕裂、接縫開口等現象。通風管直徑膨脹率不得大于3.0%。通風管應根據巷道及風機風量大小等要求選擇適當規格,連接時注意氣流方向。
Air pressure resistance: after ventilation pipe has been tested by wind resistance test, no ventilation pipe can be disconnected, coating cloth torn and seam opening. Ventilation pipe diameter expansion rate shall not be greater than 3%. The ventilation pipe shall be selected according to the air flow rate of the tunnel and the fan, and the direction of air flow shall be taken into account when connecting.
通風性能:直徑600mm的通風管百米風阻值小于54N·s/M,百米漏風率小于5%。
Ventilation performance: the diameter of 600mm ventilation pipe is 100 meters, the wind resistance is less than 54N s/M, and the leakage rate of 100 meters is less than 5%.
適用范圍:通風管配合通風設備廣泛應用于機房、地下室、遂道、市政管道工程、機械造船工程、采礦通風設備、
Applicable scope: air duct with ventilation equipment widely used in the computer room, basement, tunnel, municipal pipeline engineering, mechanical engineering, shipbuilding mining ventilation equipment,
消防排煙等惡劣工作環境下的送風及排氣、集除煙塵之用。
The use of air supply and exhaust in the harsh working environment such as fire control and smoke exhaust.
結構及規格尺寸:50-1000m
Structure and specification size: 50-1000m
上一篇:設置排煙防火閥發揮好的效果
下一篇:山東通風安裝施工中的必備的知識
相關