防排煙風管系統生產各方面的要求

發布人：http://rdhw.com.cn   發布時間：2017-08-08 16:58:01

1、材料要求

1. Material requirements

①風管材料必須為不燃材料

The material of duct material must be non combustible material

②須采用鍍鋅鋼板或冷軋鋼板

Galvanized steel sheet or cold rolled steel sheet shall be used

③金屬材料厚度不小于0.8~1.2mm

Metal material thickness is not less than 0.8~1.2mm

④穿過防炎墻樓板時，風道厚度不小于1.5mm

The thickness of the air duct is not less than 1.5mm when passing through the wall of the anti inflammation wall

2、保溫材料要求

2. Requirements of thermal insulation materials

①應采用非燃材料進行保溫，可采用玻璃纖維材料

Non combustible materials should be used for thermal insulation and glass fiber materials are adopted

②保溫層厚度不應小于25mm

The thickness of insulating layer should not be less than 25mm

③安裝在吊頂內的排煙管道，其保溫材料應與可燃物保持150mm距離

Installed in the ceiling of the exhaust pipe, the insulation material should be kept 150mm distance from combustible materials

3、排煙風速

3 smoke exhaust speed

①采用金屬材料時，風速不應大于20m/s

When using metal material, the wind speed should not be greater than 20m/s

4、排煙風口

4 、 smoke outlet

①煙氣排煙出口應采用1.5mm鋼板制作

Smoke and smoke exhaust should be made of 1.5mm steel plate

②每個排煙系統，排煙口數量不宜多于30個

Each smoke exhaust system, the number of smoke exhaust should not be more than 30

③排煙口較小面積不宜小于0.04m2

The minimum area of smoke exhaust should not be less than 0.04m2

有了山東通風管道上面的小總結，希望對廣大客戶有所幫助，如果有什么不理解的或者尋求幫助的請點擊我們的網站：http://rdhw.com.cn/或者來電咨詢，我們會盡全力為您解決

A small sum Shandong ventilation pipe above, hope to help customers, if what you do not understand or seek help please click on our official website: http://rdhw.com.cn/ or contact us, we will do our best for you to solve