通風和空調風管的結構與材料選擇

發布人：http://rdhw.com.cn   發布時間：2023-05-24 11:57:53

對通風和空調風管進行合理的結構設計，并選擇合適的材料類型，能夠強化優勢，并加強空氣流通、避免結露等，這里濟南通風管道廠家主要圍繞通風和空調風管的結構與材料選擇進行了簡要論述。

Reasonable structural design of ventilation and air conditioning ducts and the selection of appropriate material types can enhance advantages, enhance air circulation, and avoid condensation. Here, Jinan ventilation duct manufacturers mainly discussed the structure and material selection of ventilation and air conditioning ducts.

風管的結構設計要點人口數量的不斷增加，導致建筑物數量也日益增多，傳統的建筑物僅考慮自然通風，而在當代建筑物密度較大的情況下僅依靠自然通風已不能保證建筑物內部的空氣質量，在自然通風的基礎上結合機械通風能夠解放問題。

The key points of structural design for air ducts are the increasing population, leading to an increasing number of buildings. Traditional buildings only consider natural ventilation, while in contemporary buildings with high density, relying solely on natural ventilation can no longer guarantee the air quality inside the building. Combining natural ventilation with mechanical ventilation can solve the problem.

機械通風是采用風機為室內外提供強制性的風壓差進行通風換氣，合理的風管結構能夠節約能源，并獲得良好的通風效果。

Mechanical ventilation is the use of fans to provide mandatory air pressure differences for indoor and outdoor ventilation. A reasonable duct structure can save energy and achieve good ventilation effects.

通風風管的結構設計，先要合理地進行風管系統的劃分，盡量減少管線的使用，并避免多通道和彎頭，可降低系統的阻力;在需要增大或減小管徑時，應當設計斜度，緩慢改變管徑。

The structural design of ventilation ducts should first safely and reasonably divide the duct system, minimize the use of pipelines, and avoid multiple channels and bends, which can reduce the resistance of the system; When it is necessary to increase or decrease the pipe diameter, the slope should be designed and the pipe diameter should be slowly changed.

其次，主風道的風閥好設計在出風口附近，送風管與出風管的連接處應設置在建筑物的吊頂內，不能直接安裝在墻體及樓板內部，增大檢修成本，同時風管和零部件的設置也要符合建筑物設計規范。

Secondly, the air valve of the main air duct should be designed near the air outlet, and the connection between the supply air duct and the outlet air duct should be set inside the suspended ceiling of the building. It cannot be directly installed inside the walls and floors, increasing maintenance costs. At the same time, the setting of the air duct and components should also comply with the building design specifications.

另外，風管內部進行水力計算時，應當充分考慮不利因素，保證使用過程的有效性。

In addition, when conducting hydraulic calculations inside the air duct, unfavorable factors should be fully considered to ensure the effectiveness of the use process.

而對于空調風管，由于空調需要對建筑物內部進行供暖或供冷，其風管的設計要比通風風管的要求更高。空調風管系統常見的問題是結露，當空氣中水分飽和時，隨著溫度的進一步降低，就會在風管上出現水滴凝結，呈現露狀水滴。

For air conditioning ducts, due to the need for heating or cooling inside the building, the design of the ducts is higher than that of the ventilation ducts. A common problem with air conditioning duct systems is condensation. When the air is saturated with water, as the temperature further decreases, water droplets will condense on the duct, presenting as dew like droplets.

水滴不斷凝聚，會滴在天花板或室內，腐蝕材料，給人們的日常生活帶來困擾，同時水滴的凝聚會堵塞空調風管內的回水管，導致空調的運轉失效，對空調風管進行合理設計可減弱結露現象，加強空調風管的接口氣密性、折疊角處用密封膠粘接，根據建筑物結構設計空調風管的尺寸、速和流量等。

The continuous condensation of water droplets can corrode materials on the ceiling or indoors, causing inconvenience to people's daily lives. At the same time, the condensation of water droplets can block the return water pipe inside the air conditioning duct, causing the operation of the air conditioning to fail. Reasonable design of the air conditioning duct can reduce condensation, enhance the airtightness of the interface of the air conditioning duct, and use sealant to bond the folded corners. The size, speed, and flow rate of the air conditioning duct should be designed according to the building structure.

合理設計風管結構是提高風機效率、改善空調使用性能的一方面，除此之外，合理選擇風管材料，結合材料的導熱系數、理化性能，并配合科學合理的施工工藝，才能徹底解決通風系統和空調系統的上述問題。更多相關內容就來我們網站http://rdhw.com.cn咨詢吧！

Reasonable design of air duct structure is one aspect of improving fan efficiency and air conditioning performance. In addition, a reasonable selection of air duct materials, combined with the thermal conductivity and physicochemical properties of the materials, and combined with scientific and reasonable construction techniques, can thoroughly solve the above-mentioned problems in the ventilation and air conditioning systems. For more related content, come to our website http://rdhw.com.cn Consult!