怎么做能降低鐵皮風管內的阻力呢？

發布人：http://rdhw.com.cn   發布時間：2023-07-05 11:19:52

1、先鐵皮風管所用的材料應具有導熱性小、保溫，耐腐蝕、耐火等性能。

1. The materials used for the iron sheet air duct should have low thermal conductivity, insulation, corrosion resistance, fire resistance, and other properties.

2、管道設不宜太長，在可能條件下管徑要粗，式樣以圓形為佳。

2. When designing pipelines, it is not advisable to be too long. When possible, the diameter of the pipeline should be thick, and the design should be circular.

3、支管的半徑不得小于主管半徑的1/2-1/3，便于通風管道加工。

3. The radius of the branch pipe shall not be less than 1/2-1/3 of the radius of the main pipe to facilitate the processing of ventilation ducts.

4、鐵皮風管設彎曲的角度要盡量呈弧形。

4. When designing iron sheet air ducts, the bending angle should be as curved as possible.

5、設管道的彎頭要盡量少，兩個彎頭的距離要大些。當兩個彎頭的距離為管徑的3倍時，阻力大約增加80%；若為5倍時，則僅增加30%。

5. When designing pipelines, the number of bends should be minimized and the distance between the two bends should be larger. When the distance between two elbows is three times the pipe diameter, the resistance increases by approximately 80%; If it is 5 times, it will only increase by 30%.

6、盡量直立或傾斜放置，設置清掃口，連接部分應嚴密不漏氣，并便于檢修。

6. Try to place it upright or tilted as much as possible, set up cleaning ports, and ensure that the connecting parts are tight, airtight, and easy to maintain.

此外鐵皮風管加工的鋪設對于周圍環境也是有要求的，環境的把握對于管道的使用是其決定作用的，接下來濟南鐵皮風管加工廠家的分享會在以后的使用中可以參考到。

In addition, the laying of iron sheet air duct processing also has requirements for the surrounding environment, and the grasp of the environment plays a decisive role in the use of the pipeline. The sharing of Jinan iron sheet air duct processing manufacturers can be referred to in future use.

1、制作地點要有相應的加工工藝的必備工具、設施及電源和可靠的防護裝置，并有消防器材。這是我們鋪設管道必須的要求。

1. The production site should have the necessary tools, facilities, power supply, reliable safety protection devices, and fire-fighting equipment for the corresponding processing technology. This is a necessary requirement for us to lay pipelines.

2、地點處理明確，就是鐵皮風管的制作應有批準的圖紙，經審查的大樣圖，系統圖，并有施工員書面的技術質量及交底。

2. The location handling is clear, which means that the production of iron sheet air ducts should have approved drawings, reviewed detailed drawings, system diagrams, and written technical quality and safety disclosures from the construction personnel.

3、對整體的環境進行處理，集中加工應具有寬敞、明亮、潔凈、地面平整、不潮濕的廠房。

3. To handle the overall environment, centralized processing should have a spacious, bright, clean, flat ground, and non humid factory building.

以上問題的講解就到這里了，希望能夠給您好的幫助，更多事項就來我們網站http://rdhw.com.cn咨詢吧！

That's all for the explanation of the above questions. I hope it can be helpful to you. For more information, please come to our website http://rdhw.com.cn Consult!