裝置通風管道不可忽視的細節都有哪些方面?

發布人：http://rdhw.com.cn   發布時間：2020-01-15 11:20:20

山東通風管道在建筑中是必不可少的。管道的制作、安裝應遵循一定的規范，以保證管道建成后的正常使用，降低失效的可能性。在制造和安裝過程中應遵循哪些規范?

　　The ventilation pipe in Shandong is essential in the construction. The fabrication and installation of the pipeline shall follow certain specifications to ensure the normal use of the pipeline after completion and reduce the possibility of failure. What specifications should be followed during manufacturing and installation?

　　1. 風管的制造和安裝應按照設計圖紙、合同和有關技術標準進行。任何變更均應隨附設計變更或合同變更通知或技術批準。

　　1. The manufacturing and installation of air duct shall be in accordance with the design drawings, contract and relevant technical standards. Any change shall be accompanied by design change or contract change notice or technical approval.

　　2. 風道系統施工前，施工單位應與施工單位、監理單位、總承包單位、設計單位協調。檢查氣管等管道的位置方向，檢查預留孔的安裝等。施工應與土木工程和其他工作相協調。

　　2. Before the construction of air duct system, the construction unit shall coordinate with the construction unit, supervision unit, general contractor and design unit. Check the position and direction of gas pipes and other pipes, and check the installation of reserved holes. Construction shall be coordinated with civil engineering and other professional work.

　　3.風管制造安裝用的板材、型材等主要成品材料，應符合現行設計及相關產品標準，并具有出廠檢驗合格證書。材料按現行標準驗收。

　　3. The main finished materials such as plates, profiles, etc. used for the manufacturing and installation of air ducts shall conform to the current national design and relevant product standards, and shall have the factory inspection certificate. The materials shall be accepted according to the current national standards.

　　4. 完成的通風管道應具有相應的資質證書，包括主要材料的材質證書、風道強度及密性試驗報告(非金屬風道還應提供防火、衛生試驗合格報告)。

　　4. The completed ventilation pipe shall have corresponding qualification certificate, including material certificate of main materials, air duct strength and tightness test report (non-metallic air duct shall also provide fire and sanitation test qualification report).

　　5. 風道生產應優先采用、機械化加工工藝。

　　5. Energy saving and mechanized processing technology shall be preferred for air duct production.

　　6. 生產、安裝風管所使用的計量器具、試驗器具應當在合格狀態和有效檢驗期內。

　　6. The measuring instruments and test instruments used in the production and installation of air ducts shall be in the qualified state and valid inspection period.

　　7. 隱蔽工程的管道，在隱蔽前，必須經主管人員檢查同意。

　　7. The pipes of concealed works must be inspected and approved by the person in charge before being concealed.

　　在制造和安裝通風管道時，它們都有各自的要求。這樣做將使整個管道更加耐用。

　　They have their own requirements in the manufacture and installation of ventilation ducts. This will make the whole pipe more durable.

　　以上就是對裝置山東通風管道不可忽視的細節詳細介紹，想要了解更多請點擊官網http://rdhw.com.cn

　　The above is a detailed introduction to the details that can not be ignored for the ventilation pipes in Shandong. For more information, please click http://rdhw.com.cn